[Elecraft] Can I measure antenna impedance with K2?

[Don Wilhelm]

Per-Tore,

Yes it is correct.  He stated that it is the impedance at the rig end of 
the feedline.
That will not likely be the feedpoint impedance of the antenna. That 
impedance can be found if you do the calculations for the impedance 
transformation of the feedline (for which the length of the feedline 
must be known).

73,
Don W3FPR

On 7/31/2014 4:23 PM, Per-Tore Aasestrand wrote:
> Hi Matt,
>
>> Of course you realise that the output impedance of the ATU will be the
>> complex conjugate of the impedance at the rig end of your feedline.
> I wonder if this is correct
>
> IMO, the task of the tuner is to make the tx happy, so it can look into the
> load it is designed for. Thus, it will translate the impedance as seen from
> the antenna connector into something as close to 50 ohm as possible. The
> tuner will not change anything on the feeder. With or without the tuner,
> the feeder will have the same VSWR.
>
> Per-Tore / LA7NO
>
>
>
>
> On 31 July 2014 22:02, Matt VK2RQ <matt.vk2rq at gmail.com> wrote:
>
>> Of course you realise that the output impedance of the ATU will be the
>> complex conjugate of the impedance at the rig end of your feedline.
>> However, if you want to know the impedance of your antenna, you need to
>> realise that the feedline is acting as an impedance transformer, and you
>> need to take into account factors such as length of feedline, frequency of
>> operation characteristic impedance and velocity factor of the feedline,
>> etc..
>>
>> 73, Matt VK2RQ
>>
>>> On 1 Aug 2014, at 1:02 am, TF3KX <kristinn1 at gmail.com> wrote:
>>>
>>> Thanks. Yes, I can determine the tuner settings (L/C-values, etc.) and
>> from
>>> the network equations derive the impedance these settings match into. It
>>> would be neat if the K2 had enough CPU power and memory to carry these
>>> calculations out for me and just display the R+jX. Perhaps a good project
>>> for a small program or an app...
>>>
>>> 73 - Kristinn, TF3KX
>>>
>>>
>>>
>>> --
>>> View this message in context:
>> http://elecraft.365791.n2.nabble.com/Can-I-measure-antenna-impedance-with-K2-tp7591798p7591803.html
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to matt.vk2rq at gmail.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ptaa at ieee.org
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>