[Elecraft] Copper Sheetin g Suppliers?

[Gary K9GS]

There are now numerous on-line metal distributors.  Most are regional so 
I would try Googling "copper metal distributor" and you'll likely find 
one in your area.

I needed some aluminum plate a few years ago and there was one in an 
industrial park nearby.  I called them and explained what I needed. They 
had some cut-offs and got me exactly what I needed.  The price was 
reasonable too and I picked it up later that day.  If I recall they had 
aluminum, steel, copper, brass as well as alloys and plastics.




On 7/30/2014 4:14 PM, Don Wilhelm wrote:
> Brian,
>
> I have purchased copper sheet from McMaster-Carr 
> http://www.mcmaster.com/#.
> Their selection of anything hardware is quite large.
>
> 73,
> Don W3FPR
>
> On 7/30/2014 3:37 PM, Brian F. Wruble wrote:
>> All of that is a lead-in to my question. The mounting approach for the
>> AS-16SP is different from that for the PolyPhasers.  i need to find some
>> thick copper sheet that I can bend to fabricate the mounting I need.
>>
>> Can anyone recommend a supplier for copper sheet --- maybe 1/8" to 3/16"
>> thick --- and available in sizes of about 1ft. by 4" or bigger?
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to garyk9gs at wi.rr.com
>
>
> -- 
>
>
> 73,
>
> Gary K9GS
>
> Check out K9NS on the web:  http://www.k9ns.com
> Greater Milwaukee DX Association: http://www.gmdxa.org
> Society of Midwest Contesters: http://www.w9smc.com
>
> ************************************************

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com