[Elecraft] K3 Commands

[tomb18 at videotron.ca]

Hi,The first thing you will want to do is to reset the equalizer to 0 for all bands. Command: MN008;SWT53;MN255;
Next you issue the following:
MN008; which selects the equalizer menu, then you issue the equivalent of a tap on a button for the particular equalizer band you want. So for the 50hz band in the equalizer you would normally press the "1" button which is a SWT11; then you issue as many UP; or DN; commands you need.
So to raise the 50kHz equalizer by +5 you would do the following
MN008;SWT53;MN255;
MN008;SWT11;UP;UP;UP;UP;UP;


For the other bands in the equalizer you can look up the SWT table in the programmers reference for the buttons 1,2,3,4,...etc.
Note: Issuing many UP; commands without delays, will not necessarily always work for the equalizer.


73's Tom
va2fsq.com

On 7/29/14, ab2tc  <ab2tc at arrl.net> wrote:
> Hi all,
> 
> If there is a command to *set* the RX equalizer I am unaware of it. What
> would it be?
> 
> AB2TC - Knut
> 
> 
> tomb18 wrote
> > Hi there is none. 
> > You can adjust it up and down but there is no direct command to read it. 
> > 73s Tom 
> > 
> > 
> > 
> > 
> > -------- Original message --------
> > From: Fred Jensen <
> 
> > k6dgw@
> 
> > > 
> > Date: 28/07/2014 17:06 (GMT-05:00) 
> > To: Elecraft Reflector <
> 
> > elecraft at .qth
> 
> > > 
> > Subject: [Elecraft] K3 Commands 
> > 
> > I notice in the K3 Programmers manual that there is a TE command to 
> > GET/SET the Tx Eq, but I can't find an equivalent RE command [or 
> > whatever] for the Rx Eq. Am I missing something?
> > 
> > 73,
> > 
> > Fred K6DGW
> > - Northern California Contest Club
> > - CU in the 2014 Cal QSO Party 4-5 Oct 2014
> > - www.cqp.org
> > 
> > ______________________________________________________________
> > <snip>
> 
> 
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Commands-tp7591706p7591722.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca
>