[Elecraft] K3: Anyone have any troubles with latest 4.86 and RemoteRig TX audio?

[Hisashi T Fujinaka]

I've tried it both ways, and as I said, I did have it working before the
firmware update. So here's the oddity:

My headset is the Heil that I bought from Elecraft for the K2. It should
NOT need bias as far as I know. I just checked the MIC SEL and when I
have it on FPL, I do have the .bIAS. However, since I thought it didn't
need it, I did change the jumper in the RRC-1258 MkIIs to turn off the
bias. Could that be the problem?

Thanks Don.

On Sun, 27 Jul 2014, Don Wilhelm wrote:

> Does your rear panel microphone need bias?  If so do you have the bias set 
> ON?
>
> 73,
> Don W3FPR
>
> On 7/27/2014 6:50 PM, Hisashi T Fujinaka wrote:
>> I had a bit of trouble getting my mic audio working initially, but with
>> Brandon's help it was working. After updating my firmware it's back to
>> having no audio. I can change MIC SEL to FP and still run the K3
>> directly, but with it set to rP I don't get any audio at all.
>> 
>> Anyone else have this problem and have a fix? I'll have to call Brandon
>> tomorrow to figure out what all the steps are to get tx audio working. I
>> forgot to write them down.
>> 
>

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte