[Elecraft] Have to push PF1 or P2 Twice to get Macro to fully work.

[Tom Blahovici]

Hi,
The BW commands are incorrect.  They should be in 10Hz increments.
Thus for SSB you would want BW0210; not BW02100;
Could be the reason.
73’s Tom

va2fsq.com

On Jul 20, 2014, at 6:07 PM, Randy Diddel <k5rhd at arrl.net> wrote:

> Good afternoon,
> 
> I finally had some time to sit down with the Fred Cady Manual and the
> Elecraft Programmer's guide.
> 
> I operate mainly PSK/JT65 and phone and having the ability to quickly
> change over to phone if there is rare DX (for instance) would be nice to
> have.  So I broke out the programmers guide and worked up the following:
> 
> PF1 switches the radio to Data-A, Filter 4k, Mic gain to 20, power change
> 15W, etc.
> 
> The PF1 string is as follows:  MG020;BW04000;AG005;MD6;DT0;PC015
> 
> PF2 switches to SSB:  MG020;BW02100;MD2;PC100
> 
> (Yes, I do own a KXPA100)
> 
> I have sucessfully assigned the macros to each PF.  The problem is that I
> push and hold either PF on the KX3 and it seems to execute part of the
> macro but not all.  To get it to fully complete, I have to press the same
> PF key again and then all settings are correct.  So my question is, is this
> a bug, feature, or user error?
> 
> Thanks and 73
> 
> K5RHD
> 
> /randy
> 
> BTW, I am still looking for a buyer for my K3 bundle-see post earlier this
> week.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca