[Elecraft] K3 AF Gain

[K4ia via Elecraft]

The AF Gain dial can also be used like a balance control.  When you say 
they are both set the same, what is probably happening is you have the 
balance control over to the one side.   Look in the Tech Menu for a 
setting called SUB AF. The choices are nor and balance.

If you are in balance mode and you want them to be the same you have to 
set the Sub AF Gain knob to the middle.

Buck
k4ia
K3# 101  KX3 #715

On 7/19/2014 5:11 PM, Mike via Elecraft wrote:
> I know I'm probably stupid and missing something obvious, but when I turn
> on the sub receiver it is much louder in my right ear than the main is in my
>   left with the AF gain set the same on both receivers and both VFO's tuned
> to the  same frequency. RF gain is set the same on both receivers.  I  have
> one antenna connected to ANT 1 (which then goes to KPA500 then  KAT500).
> The settings are as came from the factory and diversity is not  on.  I've
> looked through the K3 manual and Fred KE7X's book and don't find  anything. Is
> this the 3 db attenuation when signal split to both  receivers?  I would
> think the attenuation would be equal. Firmware is the  latest. Sorry for the
> bandwidth, it's probably something obvious.   Thanks.
>   
> Mike KD8RQE
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k4ia at aol.com