[Elecraft] K3/P3/SVGA

[Joe Subich, W4TV]

That is because the P3 is fed from the output of the first mixer -
*before* the narrow filter, IF noise blanker gate and before the DSP
noise blanker.  Of course, one can upgrade to the most recent beta
firmware an enable the *separate* DSP noise blanking in the P3 SVGA.

73,

    ... Joe, W4TV


On 2014-07-10 10:44 AM, XE3/K5ENS via Elecraft wrote:
> Also when thinking about getting a P3 and SVGA card what you see on the P3 is
> not what you see on the SVGA monitor if you turn on the NB.  The weak
> signals are covered up by the noise on the SVGA screen.
> The NB works great but is not carried over to the SVGA screen.
>
> Keith
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-SVGA-tp7591050p7591056.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>