[Elecraft] DESK MICROPHONES FOR K3

[Jim Brown]

On 7/8/2014 10:40 AM, Mike Furrey wrote:
> I use a 50 year old Shure 444D, I did make an adapter from the K3 to the 1/4 phono plug on the Shure.

Yes, this is one of the great communications mics. When it was 
developed, many years ago, there were some serious hams at Shure.

As Don noted, virtually any dynamic mic, balanced or unbalanced, and any 
unbalanced electret mic will work just fine with the K3 or KX3. All it 
takes is the right connector with the right wiring, and the K3 and KX3 
connector pinout is shown in the manual.

73, Jim K9YC