[Elecraft] Kx 3 2 meter manual

[Wayne Burdick]

There are some additional subtleties :)  We hope to post the first edition of the manual next week. 

Wayne
N6KR


On Jul 1, 2014, at 12:55 PM, Edward R Cole <kl7uw at acsalaska.net> wrote:

> From: Tony Rowland <biggsbigbear at gmail.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: [Elecraft] Kx 3 2 meter manual
> Message-ID: <D42BFB2F-045B-4ACE-A21A-D0C3C984A7A9 at gmail.com>
> Content-Type: text/plain;       charset=us-ascii
> 
> 
> When will the 2 meter manual be ready for download?
> Sent from my iPad
> -------------------------------------------------------------------------------
> Um - what were you looking to learn from a 2M manual?
> 
> The conversion is a credit card sized pc board with two "very" tiny connectors to couple LO and ANT.  Screw in the sma connector, connect LO & ANT to pcb, two 4-40 machine screws hold it in place on top of the ATU, add a metal shield.  Final step screw thru the TO-220 PA transistor tab to the cabinet - less than an hour procedure.  All covered in the installation manual.
> 
> To use it with the KX3, go to page-21 of the KX3 Owner's Manual under "Transverter Bands" and follow the instructions for the KX3-2M.  I suggest:
> XVn = XV1
> XV1 RF = 144
> XV1 IF = 50
> XV1 PWR = 3.0
> XV1 ADR = Trn 0
> 
> Use KX3 Frequency Memory Editor to add 2m channels.
> 
> That's it!
> 
> 
> 73, Ed - KL7UW
> http://www.kl7uw.com
>    "Kits made by KL7UW"
> Dubus Mag business:
>    dubususa at gmail.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com