[Elecraft] K3 Intermittent mic connector

[bill conkling]

First thing I'd do is eliminate all but the mic, cable and K3.  If problem persists check plug on cable.  Then at mic end.  Finally check other items one at a time.

...bill nr4c

Sent from my Verizon Wireless 4G LTE DROID

Mike Sanders <k0az at centurytel.net> wrote:

>Greetings All, My K3/10F now K3/100 plus mostly loaded has a problem.
>The mic connector has to be pressed down a bit to get PTT when using
>the K3 on SSB. I use a Heil PR781 mic that goes through a Rigblaster Duo.
>The connector to the K3 comes from the Duo and is never changed or
>fooled with. Before I pull the front panel module has anyone had this
>same issue and what was the problem? Thanks for any hints/help. 73
>
>             K0AZ
>       Mike Sanders
>EM37cd SW Missouri
>     www.k0az.com
>
>
>
>
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>