[Elecraft] K3 to KAT500

[David Bunte]

Keith -

I do not believe that is the problem.  My K3 "tells" the KAT500 what
frequency it is on as soon as I change frequency on the K3 (or the
KPA500).  If not cabled appropriately, then, of course the KAT500 needs a
bit of RF to know what frequency it is on.

The problem is that for some users, even after the KAT500 knows what
frequency the K3 is on, and has a match, it sometimes thinks the frequency
has changed, and tries to find a new solution.  At lease that is the way I
understand the problem as reported by those who actually have it.  I do
consider myself fortunate to not see that issue here, but as someone else
has speculated, that may be due to the fact that I don't operate SSB.

When I first started using the KAT500 I did not have all the cabling
optimized for my setup... I got one more cable, connected it and all now
seems to be perfect.

73 de Dave - K9FN


On Tue, Jan 28, 2014 at 9:37 AM, XE3/K5ENS <nelasat at yahoo.com> wrote:

> The "solution" is for the K3 to just tell the KAT500 what frequency it is
> on.
> We have all this Elecraft equipment connected together but a lack of
> "communication" between them is the problem.
>
> Keith
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-to-KAT500-tp7583270p7583398.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>