[Elecraft] KXPA100 Kit problem, need help !!!

[George Danner]

Jean-Francois,
Do you have the ATU in the KXPA100. Did you install the latest firmware in 
the KX3 1.87 I believe.
I would check the TMP connectors to make sure they are fully seated & in the 
correct sockets.
If the above don't help, I would contact the great guys at service on 
Monday.

I just completed my KPA100 kit and have used it on the air a few times in 
the shack before installing it in my truck.
My KX3 is now much better with the addition of the KXPA100.
I really like the fully integration between the KX3 & KXPA100; especially 
the ATU integration.
Wish my K-Line was integrated as deeply.
73
George
AI4VZ


From: VA2SS
I monitored myself in my good old K2. If I use only the KX3, everything
works as it should. But immediately when and I turn on the PA in the KX3
menu and I try to transmit, I cannot hear anything in my K2, no matter the
power I choose MORE THAN 10W ,  the KX3 cannot be heard in my K2. Below 11W
I can hear my selft in my K2,

BUT by just hitting the PPT I still have a steady power output of the power
I asked for.... whithout speaking in the mic.... really strange.