[Elecraft] Problem with CM-500 plugged into frontpanel through AD1K

[Johnny Siu]

The rear sockets are slightly weak in terms of mechanical strength and I need to replace them.  As a result, using front port could be a good alternative in long term.

Just a personal preference.

73

Johnny VR2XMC
 

________________________________
 寄件人︰ barry whittemore <wb1edi at hotmail.com>
收件人︰ "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
傳送日期︰ 2014年01月23日 (週四) 3:52 AM
主題︰ Re: [Elecraft] K3: Problem with CM-500 plugged into frontpanel	through AD1K
  

I do not understand the need or desire to use the front port. 

I use CM-500 but plug into the rear ports.  One of the features of the really like about the K3 is the clean look with nothing plugged into the front.

I converted an old hand mike into a K3 pinout so i could use it if i ever wanted to use a hand mike.  so far other than when i tested it the connector has been vacant.

GL 



Barry

NF1O

                          
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html