[Elecraft] Scary K2 event this morning!!

kevinr at coho.net kevinr at coho.net
Wed Jan 15 16:26:17 EST 2014


Hi Ed,
   This has happened to me.  I heat my house with a wood stove and the
radio shack is far away from it.  When the door is closed it can get
quite cold in there.  As Wayne explained to me when my fan started up
on one frosty morning it is because he is from California and knows
little about weather below 0 degrees Centigrade :)  The firmware for
starting the fan depends on the temperature reading.  Just wait until
the room warms up the K2 and it should work just fine.
   73,
      Kevin.  KD5ONS



> To K2 Wizards et al
>  
> A scary event this morning involving my 3500+ K2 which was
> realigned by Gary a few months ago…..by-the-way, Gary did an outstanding
> job
> and my K2 never has worked better!!
>
>
> This morning, K2-100 and KAT100 tuner, rig was working FB
> Tuesday night, I turned it on from cold start in cold room this morning
> and the
> K2 cooling fan immediately started running…..weird……when I
> transmitted I
> immediately (remember, rig is still cold from sitting overnight) got a PA
> HOT
> error message!!!  The K2 heat sink was
> cold to the touch, by-the-way.
> WTF!??
>
> Powered off K2, turned back on and same error message.
> Next  time, power K2 and 12vdc supply. Powered
> back on DC supply, then K2 and got same PA HOT message….now it’s
> getting scary!
>
> WTF…….I pull off all cabling and run K2 into dummyload.
> Power back up and PA HOT error again! Now I’m considering a hardware
> reset which
> I really don’t want to do.
>
> So…….for grins and gigglys this time I turned K2 off, DC
> power supply off and removed the 12vdc cable  from back of K2 and voila,
> when I reconnected DC power, K2 operating
> normal again and back on air making 100w thru KAT100 into dummyload and
> into
> dipole.
> So, for my K2 wizard friends, any thoughts what happened? I’m
> thinking a relay got “suck” in some weird state and took all this to
> get everything
> reset again?
>
> I do appreciate any and all advice y’all can offer.
> 73
> ed
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html




More information about the Elecraft mailing list