[Elecraft] K3: Speakers

[David Anderson]

Thanks for the review Ed. On that basis I have ordered a pair for my KX3 for use in the shack, as I wanted stereo and RF immunity particularly. 

73

PS Ed I am working towards getting back on 144MHz EME again, with a smaller system than previously, but should be enough to work you on JT and possibly CW in ideal conditions. (2 x 2WL I0JXX XPOL yagis about 15dBd gain and 1kW from SSPA -  special high power permit for EME). Lot of work to do to get there though.

73

David Anderson GM4JJJ


> On 15 Jan 2014, at 06:01, Edward R Cole <kl7uw at acsalaska.net> wrote:
> 
> I finally ordered and have received my West Mountain COMspkr for use with my KX3.  Work very nice and no RF sensitivity (even with 6-elem yagi pointed at .  I played with the HI CUT control and found a "2-oclock setting pleased me.  I have no equalization set on the KX3.  With the control full CW sound is very flat and crisp but hear more background noise (this evaluation listening to 6m with preamps on and 20m with preamps off).
> 
> Not using the COMspkr with my K3 as I have an old unamplified 8-inch National Radio speaker that I like.
> 
> 73, Ed - KL7UW
> http://www.kl7uw.com
>    "Kits made by KL7UW"
> Dubus Mag business:
>    dubususa at gmail.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html