[Elecraft] Connecting a IC PW-1 to Ke

[Joe Subich, W4TV]

Randy,

Connection diagram for any transceiver with MK II and PW-1 is available
from the application note "Using the PW-1 safely (and with non-Icom
transceivers) <http://microham-usa.com/store/cmspage.php?page_id=27>
on the support page at www.microHAM-USA.com/support.html.

You will probably want to connect ALC from the PW-1 to K3 but set
it slightly above normal drive levels as the PW-1 uses ALC to protect
itself in event of problems.

73,

    ... Joe, W4TV


On 1/13/2014 4:19 PM, Randy wrote:
> I am thinking of connecting a PW-1 to my K3.  I would like to the K3 to
> send band data to the PW-1 and have the PW-1 following the K3 just as if
> the K3 was a Icom transceiver.
>
> I am thinking of connecting the CI-V port on the back of my MicroHam
> MKII to the K3.  What I'm a little uncertain about is the ALC set up. Is
> there any problem with this arrangement?
>
> Randy, AA8R
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>