[Elecraft] K3 Internal Tuner

[Cady, Fred]

Hi Fred

Reading the L and C ATU Values
1.      Select LC SEt in the CONFIG menu.
2.      Tap MENU to exit.
3.      Tap ATU TUNE; VFO A shows the capacitance (CA indicates the capacitance on the antenna side, Ct on the transmitter side). VFO B shows the inductance.
4.      Tap MENU to exit.
Manually Setting L and C Values
1.      Select LC SEt in the CONFIG menu.
2.      Tap MENU to exit.
3.      Tap ATU TUNE; VFO A shows the capacitance (CA indicates the capacitance on the antenna side, Ct on the transmitter side). VFO B shows the inductance.
4.      Tune VFO A to change the capacitance; VFO B to change the inductance. Tap ANT to toggle between CA and Ct.
5.      Tapping CLR clears the stored LC data for the present band.

Fred Cady KE7X
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the Summit"
www.ke7x.com or www.lulu.com
(Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station")

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of WY2E
> Sent: Tuesday, January 07, 2014 1:14 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Internal Tuner
>
> Anyone know how to read the settings of the K3 internal ATU after a
> tune
> cycle. I want to compare to my KAT500.
>
>
> TNX 73 Fred, WY2E
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html