[Elecraft] K3/0 Remote setup and Brainboxes

[John Simmons]

  Paul,

You  need to configure your router/firewall to forward the port used by 
the ES-257 from the router to the device. You will need to assign a 
static IP to the device. Serial  port 1 uses port 9001, serial port 2 
uses port 9002. Look at your router documentation and search the web for 
port forwarding info.

73,
John NI0K

------ Original Message ------
From: "Paul A DeFelice" <k9nu at mchsi.com>
To: elecraft at mailman.qth.net
Sent: 1/5/2014 9:47:46 AM
Subject: [Elecraft] K3/0 Remote setup and Brainboxes

>
>As part of my remote setup, I purchased a Brainboxes ES-257 2 Port 
>RS232
>ethernet to serial adapter to control a couple of serial port 
>accessories. I
>can control the ES-257 and the attached equipment using their Boost.LAN
>Manager software over my LAN but cannot get the device configured to 
>accept
>control using my external IP. Any suggestions or direction would be 
>much
>appreciated.
>
>
>73,
>
>
>Paul K9NU
>
>