[Elecraft] K3 - AFSK RTTY

[Rick Tavan N6XI]

Here is one thing that will cause a similar problem: If you program a
memory while DATA MD is X, then every time you recall that memory you will
be put back into X, regardless of the DATA MD setting prior to the memory
recall. You might have set the memory years ago when using FSK D and now
are using AFSK A. Use the memory, go directly to FSK D. This bit me several
times this weekend. However, I don't see an obvious connection between
memory recall and N1MM band map clicking.

/Rick


On Sun, Jan 5, 2014 at 5:14 PM, Fred Jensen <k6dgw at foothill.net> wrote:

> What would a contest be if everything always worked like it did the last
> time in the contest.
>
> I use a minimalist RTTY setup:
>
> 2 stereo cables from LINE IN/OUT to LINE OUT/IN
> AFSK-A with PTT from VOX
> N1MM with one instance of MMTTY
>
> Basically, it worked fine, made over 700 Q's.  At the urging of the club,
> I decided on the new SO Unlimited [i.e. assisted], and that worked OK too
> except:
>
> Every time I clicked on a band map spot, the radio went to FSK-D, and of
> course wouldn't key.  I had the couple of usual N1MM lockouts and
> re-starting N1MM also caused this change to FSK-D.
>
> I'm running 4.58 FW, haven't loaded new in a long time, and N1MM is
> running 13.10.2, also haven't updated that in quite awhile, both have been
> working very well.
>
> I don't think this is a K3 problem, but wanted to check if anyone else
> using the minimalist configuration has seen this.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2014 Cal QSO Party 4-5 Oct 2014
> - www.cqp.org
>
> Go SF!
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Rick Tavan N6XI
Truckee, CA