[Elecraft] KRX3 input protection

[Arie Kleingeld PA3A]

Steve,

the subRX of the K3 has its protection (an rf triggered relay if the 
power coming into the rx is too high).

I've used the K3-KPA500 on a beam and I had a diversity vertical 
connected to the subrx quite next to it. No problem at all.
It all depends on the coupling of the antennas. Try and see how you go 
at your QTH; the subRX is protected.

73
Arie PA3A

AD0ES schreef op 3-1-2014 15:23:
> Hi all,
>
> My KRX3 is on the truck and due tuesday.  Quick question:  I will be running the main receiver on a receive only antenna
> fed via the KXV3A and the subrx via its bnc aux.  These antennas are quite close to the xmit antennas.  Should I use
> any sort of attenuation and/or external TR switch on either of these receiver inputs?  I eventually will be running a KPA500
> full power...
>
> tia,
> Steve AD0ES