[Elecraft] RMS Express

[Matt Zilmer]

Hi John,

In the TNC settings, you can check the box (for Elecraft Radios) that
indicates USB-Digital.  This will cause the TNC to set the K3 or KX3
to DATA A mode.

There should be no changes needed to TNC module.  The TNC has had this
setting since at least 2010, but only for transceivers that support an
external data mode - the K3 being one of these.

73,
matt W6NIA / NNN0UET 

On Thu, 2 Jan 2014 07:33:05 -0800, you wrote:

>I use RMS Express with my K3 & KX3 and wonder if I am the only one that has a problem. 
>Every time RMS Express changes the radios frequency it also changes the mode to USB.
>I have to then change it to DATA so the TX & RX equalizers are centered, PTT is selected, levels are properly set and on the K3 the rear panel connectors are selected. 
>Are there others that want changes to RMS Express to correct this?
>
>John Hendricks K7JLT
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html