[Elecraft] OT: 2 port 50 ohm RX splitters ---TNX

[Joe Subich, W4TV]

Jack Smith has a kit - everything except case and connectors:
   http://cliftonlaboratories.com/z10050a_3_db_hybrid.htm

73,

    ... Joe, W4TV


On 1/1/2014 9:15 AM, alsopb at nc.rr.com wrote:
> Thanks guys.  Looks like the W8JI design is easiest to build.
> Mouser has the binocular cores needed.
>
> 73 de Brian/K3KO
> ---- alsopb at nc.rr.com wrote:
>> A while back there were some postings on recommended commercial 50 ohm two port splitters for receiver use.
>>
>> Can't find the postings.  Cheaper is better.  Loss for my application is relatively unimportant since they will be signal generator driven and followed by step attenuators.  Simple HB designs may also be of interest.  Kits would be ideal.
>>
>> Of course the K3 has one built in to route the main RX antenna to both the main and sub rx.
>>
>> 73 de Brian/K3KO
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>