[Elecraft] New ham and the KX3

[Anthony Marriott]

The Par end fed is a good antenna choice and will enable operation on 10/20/40 without a tuner.  You may also consider a push-up fiberglass pole -  30 footer runs around $100 and works great with a couple of bungee cords and some electrical tape. I usually tape the end fed match box a couple of sections down and run the antenna as a sloper.  You also need about 50ft coax feeder of course.

Paul
AD5BV

Sent from my iPhone

> On Feb 26, 2014, at 8:18, Sean Wall <seancwall at gmail.com> wrote:
> 
> Hi folks,
> 
> I want to thank everyone who offered advice, it's invaluable to a new ham
> like myself!
> 
> I've settled on the KX3 -- I like the fact that it's versatile enough to be
> a decent base station and it can go on the road with me.  Plus, it seems
> that it has a lot of features that you generally see on more expensive
> rigs.  The SDR aspect also appeals to me as I'm a nerd and I'd like to
> experiment with SDR applications on my laptop.  I do software development
> with a masters in electrical engineering, so I'm not worried about the KX3
> being overly complex.  I'll figure it out eventually, I think.  :D
> 
> 
> The one definite take-away which was clear to me is "it's all about the
> antenna".  I'm considering other antennas other than the Buddipole now.
> The current front runner is the LNR End Fed 10/20/40 wire antenna.  I like
> it because you tune it for 40 m and 10/20 should fall into place.  Also,
> you can remove the supplied radiator and attach a new one to tune in other
> bands.  It's also a heck of a lot cheaper than a Buddipole.  (Not to
> disparage the BP -- I've read a lot of good reviews about it -- but I'd
> rather go with something simpler and less expensive right now.)  I haven't
> looked into the magnetic loop antennas yet, but I'll get to that.  One
> question though -- the LNR site said no antenna tuner is needed or
> recommended, which makes sense in this case.  I was still considering
> getting the optional antenna tuner for the KX3, but can you disable it in
> the settings if you don't want to use it?
> 
> I received about equal number of responses on either side of the 10w/100w
> fence.  Once again, it seemed to boil down to "it won't make a lot of
> difference if you don't have a good antenna to start with".  I'll stick
> with 10w for now, and I can get the 100w amp later.
> 
> BTW - I plan on initially using phone as I'm still learning Morse, but I
> would like get to get into CW at some point.
> 
> Also, I do plan on joining a local ham club.  There are several in my area
> so that should be no problem.  If they're all as friendly and accommodating
> as you folks, I should have no problem getting help.  :)
> 
> Thanks again everyone!
> 
> 73 - Sean (call sign not in the ULS database yet - should be this week!!)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html