[Elecraft] KPA500 Default Band?

[bill conkling]

What's the big deal?  Once the K3 is on, it should jump to whatever band the K3 is set to??

The KX3 won't tell the KPA500 what band till it spits out some ref.

...bill nr4c

Sent from my Verizon Wireless 4G LTE DROID

Jim Bennett <w6jhb at mac.com> wrote:

>So, as Lyle (KK7P) and Brian (K3KO) are saying, this is due to (1) having the KPA500 set to K3 (I do), and after the amp sits and capacitors discharge, there is no voltage coming through the acc connector and the amp goes to 60 meters. 
>
>Well, if that's the case then I guess there isn't much that can be done about it. Sighhhhh.......
>
>Tnx, Jim
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>