[Elecraft] KPA100 recommended max power for digital modes?

[Jack]

Minimum power to accomplish your communication goals, Bill. That still 
*is* part of the FCC regulations, is it not?

Jack, W6NF/VE4SNA

On 2/22/2014 5:45 PM, Bill Turner wrote:
> ORIGINAL MESSAGE:          (may be snipped)
>
> On 2/22/2014 2:05 PM, Doug VE3VS wrote:
>> If you, or
>> anyone else uses much higher power, that strongest signal will "take 
>> over"
>> the passband on most receivers, spoiling other QSOs that are going on 
>> at the
>> time.
>
> REPLY:
>
> This has been true forever, not just with PSK31, and this is why 
> narrowband receivers were invented in the first place. PSK31 is a very 
> narrowband mode so why not receive accordingly? Narrow your RX 
> bandwidth down to 100 Hz or so and the problem goes away and everyone 
> can run whatever power they like.
>
> 73, Bill W6WRT
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com