[Elecraft] [Elecraft_K3] Please test KPA500 rev. 1.38 if you get a chance

[Don Nesbitt]

Loaded 1.38 and checked - no surprises in normal operation with K3 & KAT500 all appropriately cabled together.  73 es gud dxing -- Don N4HH


________________________________
 From: Wayne Burdick <n6kr at elecraft.com>
To: Elecraft Reflector <elecraft at mailman.qth.net> 
Cc: "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com> 
Sent: Tuesday, February 18, 2014 11:45 AM
Subject: [Elecraft_K3] Please test KPA500 rev. 1.38 if you get a chance
 


  
Hi all,

We updated the KPA500 beta firmware to revision 1.38 yesterday (from 1.37). The change was minor, pertaining to initial conditions when the KPA500 is used at remote locations. 

If you get a chance, please load rev. 1.38 and verify that it is working well for all normal operation. Once we see a few more positive reports, we'll be going to production status on the K3, KPA500, and KAT500 beta firmware releases.

If you haven't already loaded K3 rev 4.83 and KAT500 rev 1.58, I'd encourage you to do these updates as well. The difference between the new firmware and previous production releases is pretty dramatic, as reported by beta testers over the past several days.

73,
Wayne
N6KR


__._,_.___
Reply via web post  Reply to sender   Reply to group   Start a New Topic  Messages in this topic (1)  
Visit Your Group 	* New Members 6  
 
• Privacy • Unsubscribe • Terms of Use 
. 

__,_._,___