[Elecraft] K2 bandwidth modification issue --- Success!-----

[Don Wilhelm]

Steve,

Great for finding that problem.  Something like that is not easy to 
find, but it sounds like you have 'found success'  Good work.

73,
Don W3FPR

On 2/17/2014 9:52 PM, Steve Garwood wrote:
> Don,
>
> I pulled the KSB2 board again and ran through the connections between the
> crystals with the ohmmeter.  I found a short to ground between X5 and X6
> that should not have been there.  I ended up pulling the two crystals.  I
> found a small piece of copper lifted on the board, shorting the crystal can
> to ground on X5.  Operator error on this one.
> Reassembled, and now I have the desired wider bandwidth on OP1.
>
>