[Elecraft] [K3] 12v outlet only puting out 11 volts

[Alan Bloom]

The P3 should work fine with 11V.  When I tested mine it worked down to 
about 6V or so, although that is not guaranteed.

It is normal for the K3 power connector to show a voltage drop compared 
to the 12V input connector, although 1.5V drop seems kind of high. 
Could some of that drop be in the power cable?

Alan N1AL


On 02/17/2014 08:20 AM, mike wrote:
> Unable to run P3/VGA from K3 12v output for K3 serial number #5981. Only
> seeing 11 volts when the K3 sees 12.5 volts.
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-12v-outlet-only-puting-out-11-volts-tp7584345.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>