[Elecraft] CMP ALC on display

[Don Wilhelm]

Tony,

It is possible that something has gotten mixed up in your firmware.
Hopefully you have saved your KX3 configuration - if you have, you can 
try an EEINIT (parameter initialization).  See page 44 in the manual.

If you have not saved a configuration (using KX3 Utility), you can still 
try it by saving the configuration first.  The danger in saving the 
configuration just before EEINIT is that the error you have could just 
be brought back when you do the configuration restore.

If you do not have a saved configuration, you may be able to obtain the 
factory configuration data file from Elecraft.  Contact 
support at elecraft.com to obtain that file.

73,
Don W3FPR

On 2/13/2014 6:33 PM, Antonio Matias wrote:
> Hi Jim
> sorry to trouble
>
> but no fix the problem yet
> all the same. the CMP wont get out of there, and i like to see the SWR/RF
> reading
> Some how it might need modified another item on menu or so.
> I just can´t figure what can it be...
>
>
>