[Elecraft] K3 PTT Error

[Joe Subich, W4TV]

 > Any thoughts on what I should do or what setting I am missing. I have
 > the PTT set currently for Config:Off-RTS. I am wondering if this is
 > where I am going wrong.

microHAM interfaces *do not* support DTR/RTS on the serial port.  Set
CONFIG: PTT-KEY to OFF-OFF when connecting the K3 to *any* microHAM
interface.

73,

    ... Joe, W4TV


On 2/13/2014 12:34 PM, Keith Heimbold wrote:
> Been reinstalling my K3 serial 1391 back into the shack and was
> connecting it to the MicroHam USB 3 and was getting some PTT Errors
> that aren't there if I remove the USB 3. Does all sorts of funky
> things with the display like blanking out the frequency in the VFO,
> and other general inconveniences. I also have a BY-1 paddle set up
> and have the key output connected to my SPE 1K. I plan to build a
> cable for ALC this weekend but have been running it through amp more
> for antenna switching purposes than for QRO.
>
> Any thoughts on what I should do or what setting I am missing. I have
> the PTT set currently for Config:Off-RTS. I am wondering if this is
> where I am going wrong.
>
> Thanks,
>
> Keith AK6ZZ
>
> Sent from my iPhone please excuse typos
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html
>