[Elecraft] K3 10Mhz IF questions with the latest beta

[Wayne Burdick]

Hi Jim,

If you tune below "0.000.00" as indicated on the display, you encounter a leetle buglet not yet fixed. Try rotating the VFO clockwise until you get above 0. 

Wayne
N6KR


On Feb 12, 2014, at 7:47 PM, Jim Miller <jim at jtmiller.com> wrote:

> Starting to setup for some LF up conversion with the new 10Mhz IF.
> 
> Settings:
> 
> XV1 on
> XV1 RF 0
> XV1 IF 10
> XV1 PWR L .05
> XV1 OFS 0.00
> XV1 ADR trn1
> 
> When I exit the CONFIG menu the frequency shows 333.045.80. Seems odd...
> 
> P3 display shows 14.333.037.30 for the cursor location.
> 
> I would have thought the display would have read KHz with some reasonable
> values and the P3 would likewise display the desired result.
> 
> I must be doing something wrong.
> 
> Suggestions?
> 
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html