[Elecraft] K2 Won't power on

[Don Wilhelm]

Jeremy,

Leave them disconnected until you find the culprit.
Take notes of waht you have done if necessary so you can restore things 
after you have found the problem.

73,
Don W3FPR

On 2/12/2014 8:46 PM, JeremyJones wrote:
> Lifting one end of R45 still showed 70 ohms.  Lifting one end of RFC4
> increased to 87 ohms.  I left the leg of R45 disconnected when taking this
> measurement, and I want to confirm whether I should leave the components
> disconnected as I go through, or reconnect them before moving on to the
> next.
>
>