[Elecraft] 270V ERR KPA500

[Brian Alsop]

Or the interlock hardware is installed wrong.

73 de Brian/K3KO

On 2/12/2014 17:28, bill conkling wrote:
> Mine did this right from the start.  Trace the 270 volt wire from PS go amp module, thru the Z bracket.  Somewhere the 270 is going low.  Mine had a bad cap on the circuit board near the 270 V connector.
>
> ... bill nr4c
>
> Sent from my Verizon Wireless 4G LTE DROID
>
> DGB <ns9i2016 at bayland.net> wrote:
>
>> I'm getting this error from my amp when I turn it on and set it in the
>> OPER mode. Then it requires shutoff via the rear switch to shut it off.
>> I've been running it off 120v and has been working fine.
>>
>> What do I need to look for?
>>
>> 73 Dwight NS9I
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2247 / Virus Database: 3697/6586 - Release Date: 02/12/14
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2247 / Virus Database: 3697/6586 - Release Date: 02/12/14