[Elecraft] Antenna question
Barry LaZar
k3ndm at comcast.net
Tue Feb 11 19:09:01 EST 2014
George,
That is a very good question. However, it is hard to quess. But,
one thing going in your favor is that one antenna is horizontal and the
other is vertical. This will minimize the amount of coupling between the
two. If you can get some horizontal separation between the two, it just
might be physically safe. If you get really good decoupling, it could be
on the order of 30 db. that means that a 100 Watts will look like 100 mw
to your receiver.
I actually do a variant of what you are asking here. I have a
Carolina Windom and an 18' base tuned vertical. I know there must be
some interaction, but so far nothing has smoked. I know better than to
try this without really looking at it, but I didn't think and did it
anyway. My antennas are about 15-20 apart horizontally and 15 feet
vertically. Maybe I had better have a look at it myself. But, my guess
is you'll be OK as long as you don't need to receive at the same time
you are transmitting. You will overdrive your receiver and not hear
anything during transmissions, but the 100 mw or less into the receiver
should be physically safe. That part of the answer should be answered by
Elecraft as to the maximum energy the receiver can tolerate.
73,
Barry
K3NDM
On 2/11/2014 6:36 PM, George Thornton wrote:
> This might be a stupid question, but here goes.
>
> I have a small lot. I currently am using a 3 element Yagi that barely fits on the property. I was thinking about getting a vertical as a second HF antenna. If I put it up it is going to have to be pretty close to the Yagi.
>
> I have a dual receive K3. If I have both receivers going, one on each channel, and I broadcast on one of these antennas, am I in any danger of overloading and frying the other receiver?
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list