[Elecraft] K3 FSD-D (RTTY) power-control bug fixed

[Joe Subich, W4TV]

Sorry, Wayne.  It's not fixed.  Although the power adjusts now it still
comes up more than 1 dB low (65 to 75 Watts for 110W commanded) and
takes more than five seconds to reach set output.   These tests in
FSK_D.  For comparison, in CW power output comes up at more than 90%
of the commanded level and reaches full output in 1 second or less.

I've performed wattmeter and power calibration - they have little
if any impact on the issue.

73,

    ... Joe, W4TV


On 2/8/2014 12:23 PM, Wayne Burdick wrote:
> Hi all,
>
> It appears that I've fixed the reported bug in FSK-D mode (RTTY) where power could not be increased while transmitting. I know some of you are in the middle of an RTTY contest as we speak, and if you'd like to try the new firmware, please email me directly.
>
> 73,
> Wayne
> N6KR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>