[Elecraft] K2 to kat100 coax

[Dick Dievendorff]

You'll be fine with short lengths of the smaller sized coax.  Larger
diameter coax is more important for long runs where the loss difference
becomes significant.  I use LMR-240 for my in-shack connections.   I use
LMR-400 for the 100' run to the base of my tower.

But do use good quality coaxial connectors.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave at dpomeroy.com
Sent: Saturday, February 08, 2014 12:52 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K2 to kat100 coax


Is rg58 ok for this or do I need rg8?


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html