[Elecraft] Using the K3 remote

[Don Wilhelm]

Stewart,

See page 44 of the manual.  You cannot simply strap between ACC pins 5 
and 8 - that connection must be removed after the power off command is sent.

73,
Don W3FPR

On 2/5/2014 9:49 AM, Stewart Bryant wrote:
> I have a K3 that I wish to operate remotely.
>
> I am happy to leave it running all the time, but I have a
> computer controlled mains relay on the input of the PSU that I can
> use to power cycle it if there is a problem.
>
> Can I just put a link between pins 5 & 8 of the aux plug and
> power on/off via the PSU mains?
>