[Elecraft] K3 Beta Firmware 4.81 Release

[Steve AI9T]

Anyone have any problems with the new Firmware. I installed the firmware 
updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3 
after the update. There was some kind of problem with the power output. 
For starters I could not adjust the power out while the rig was keyed. 
For instance I tried to adjust the power on my KPA500 from 250 watts to 
500 and could not adjust it while keying it. If I unkeyed I could raise 
the power a bit on the K3, then key back up to see what the AMP output 
was, then unkey to adjust again, then key to check again.

I installed the older version of firmware back on the K3 and all was 
well again.

-- 
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)