[Elecraft] K-3

[Jack Brabham]

Punch the "DISP" button and dial up the power supply voltage via the "B" 
knob.

That way you can check to see if you are getting good power.  A drop of 
a few tenths of a volt on TX is normal.

73 Jack KZ5A

On 2/4/2014 2:32 PM, GMuller885 at aol.com wrote:
> I am having trouble with the K-3. When I xmit for a period of time the
> Display starts to fluctuates with the modulation in my voice. The longer I am
> on  the more rapidly it fluctuates till it shuts down the K-3. I have removed
>   all external cables and even done this with a dummy load. I have a DX
> engineering Current chock at the entrance to the house and at the antenna. I am
>   told that people can here RF on the signal. Any suggestions?
>   
> Gerald Muller KF5EYC
> GMuller885 at aol.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>