[Elecraft] K3 utility help

[Don Wilhelm]

Mike,

That may be true, but if the P3 is in place, the K3 rate must be set to 
38,400 or some things will not work together.  I don't know whether a P3 
is involved in the original post or not.

73,
Don W3FPR

On 2/4/2014 4:25 PM, Mike Reublin wrote:
> I think the k3 Utility will match whatever the K3 is set to. AFAIR, it cycles thru all the baud rates.
>
> 73, Mike NF4L
>
>