[Elecraft] SPOT for SSB feature request

[Don Wilhelm]

Sorry about that - replace 'per band' with 'per mode' in the post below.
73,
Don W3FPR
--------------------------------
Bill,

One thing you might want to check is your menu setting for VFO CRS (VFO 
Coarse Tuning).  You could set that to 500 Hz for SSB - it is a per band 
setting.

That may not help with your request about the SPOT button, but it may be 
a good substitute.

73,
Don W3FPR

On 2/2/2014 4:30 PM, Bill Frantz wrote:
> A small item for the infinitely long desired feature list:
>
> I have noticed that SSB stations usually transmit on multiples of 500
> Hz -- For example the Elecraft SSB net 14.3035 MHz and and W1AW/5 on
> 28.4570 MHz. If pressing SPOT when in SSB mode would set the frequency
> to the nearest multiple of 500 Hz it would quite useful.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html