[Elecraft] K1 build website?
Don Wilhelm
w3fpr at embarqmail.com
Mon Feb 3 11:44:12 EST 2014
Jim,
None that I know of, but the manual is straight-forward, just follow
through the assembly steps and you should not have a problem. If there
is something you do not understand, just ask on this reflector and you
are likely to get help quickly.
73,
Don W3FPR
On 2/1/2014 5:19 PM, Jim Hahn wrote:
> Is there a website that is dedicated to the build of the K1-4? jim in Maine
>
>
>
>
> On Friday, January 31, 2014 10:54 PM, "elecraft-request at mailman.qth.net" <elecraft-request at mailman.qth.net> wrote:
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (riese-k3djc at juno.com)
> 2. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (Ken G Kopp)
> 3. Re: Update on KAT500/KPA500 firmware tweaks (Sam Morgan)
> 4. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Ray Sills)
> 5. Re: Would anyone like to see an all-mode VHF/UHFofferingfrom
> Elecraft? (Joe K2UF)
> 6. Re: Update on KAT500/KPA500 firmware tweaks (XE3/K5ENS)
> 7. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (John Marvin)
> 8. Re: K3 Passband/DSP Filter Display Question ? (Phil Hystad)
> 9. Re: K3 Passband/DSP Filter Display Question ? (Phil Hystad)
> 10. Re: Update on KAT500/KPA500 firmware tweaks (AG0N-3055)
> 11. Re: Update on KAT500/KPA500 firmware tweaks (Bill W2BLC)
> 12. Re: K3 Passband/DSP Filter Display Question ? (Don Wilhelm)
> 13. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (David Gilbert)
> 14. Re: Update on KAT500/KPA500 firmware tweaks (Sam Morgan)
> 15. No K3 Sub Receiver audio (Ron W3ZV)
> 16. Re: No K3 Sub Receiver audio (Dick Dievendorff)
> 17. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Bernie KF0QS)
> 18. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Bernie KF0QS)
> 19. Re: Would anyone like to see an all-modeVHF/UHF offering from
> Elecraft? (MontyS)
> 20. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Dr. William J. Schmidt, II)
> 21. Setting up the frequency offset for the K3 standard filter
> (Carl Yaffey)
> 22. Re: Setting up the frequency offset for the K3 standard
> filter (Dick Dievendorff)
> 23. Re: Setting up the frequency offset for the K3 standard
> filter (Don Wilhelm)
> 24. Would anyone like to see an all-mode VHF/UHF offering from
> Elecraft? (John Santillo)
> 25. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (Oliver Dr?se)
> 26. [K3] Data Mode AFSK A Dual PB (Joel Black)
> 27. Re: Update on KAT500/KPA500 firmware tweaks (Fred Jensen)
> 28. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Bob)
> 29. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (VK4JRC)
> 30. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (Jim Lowman)
> 31. Re: Would anyone like to see an all-mode VHF/UHFoffering from
> Elecraft? (Edward R Cole)
> 32. Re: Update on KAT500/KPA500 firmware tweaks (Fred Jensen)
> 33. Re: Would anyone like to see an all-mode VHF/UHF offering
> from Elecraft? (Jim Lowman)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 31 Jan 2014 15:46:25 -0500
> From: <riese-k3djc at juno.com>
> To: lists at subich.com
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Would anyone like to see an all-mode
> VHF/UHFoffering from Elecraft?
> Message-ID: <AABKQ2C8PAVBL46S at smtpout01.vgs.untd.com>
> Content-Type: text/plain; charset=us-ascii
>
> more knobs more buttons,,, hundreds of buttons
>
> HAR
>
> Bob K3DJC
>
>
> On Fri, 31 Jan 2014 15:36:58 -0500 "Joe Subich, W4TV" <lists at subich.com>
> writes:
>>> A K3-based successor to the Yaesu FT-736 would be far, far
>> better.
>>
>> The FT-736R is at least half again the size three times the weight
>> of the K3/10 with KXV-2 for approximately the same power output.
>> One
>> still needed external amplifiers for reasonable (> 100W) power
>> level.
>>
>> There is little difference in size, weight and complexity between
>> the
>> K3/10 with KXV-2 plus XV-220/430 (or K3/100 with XV-144/220/430)
>> and
>> the FT-736R but the performance difference is night and day.
>>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 31 Jan 2014 13:53:25 -0700
> From: Ken G Kopp <kengkopp at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Would anyone like to see an all-mode
> VHF/UHFoffering from Elecraft?
> Message-ID:
> <CAD4CdTPFhMDDVvFnny0Go27YeGDUQeBwt4nUKQWXzy4xt_sodQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Don't forget the blocks of lead for added weigh (:-)
>
> K0PP
> On Jan 31, 2014 1:48 PM, <riese-k3djc at juno.com> wrote:
>
>> more knobs more buttons,,, hundreds of buttons
>>
>> HAR
>>
>> Bob K3DJC
>>
>>
>> On Fri, 31 Jan 2014 15:36:58 -0500 "Joe Subich, W4TV" <lists at subich.com>
>> writes:
>>>> A K3-based successor to the Yaesu FT-736 would be far, far
>>> better.
>>>
>>> The FT-736R is at least half again the size three times the weight
>>> of the K3/10 with KXV-2 for approximately the same power output.
>>> One
>>> still needed external amplifiers for reasonable (> 100W) power
>>> level.
>>>
>>> There is little difference in size, weight and complexity between
>>> the
>>> K3/10 with KXV-2 plus XV-220/430 (or K3/100 with XV-144/220/430)
>>> and
>>> the FT-736R but the performance difference is night and day.
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 31 Jan 2014 14:53:31 -0600
> From: Sam Morgan <k5oai.sam at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Update on KAT500/KPA500 firmware tweaks
> Message-ID: <52EC0D4B.9000000 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> hmmm...let me have a shot at that one
> 100w vs 500w ....
> now I wonder what could be the difference...
> hello test
>
> On 1/31/2014 2:41 PM, Bill W2BLC wrote:
>> Sure am looking forward to a successful fix for the tuner's problems -
>> then I will be able to use my tuner and amp. Otherwise, I will return to
>> a manual tuner and tube based amplifier. This has not been a pleasant
>> experience. I have to wonder how it is that the internal tuner to the K3
>> works so well - yet the external 500 Watt tuner does not.
>>
>> Bill W2BLC K-Line (????)
More information about the Elecraft
mailing list