[Elecraft] Remoterig k3/0 mini questions

[Oliver Dröse]

Hi Jeff,

what you configure has no influence on the K3/0 mini! Every single menu 
item you change will only influence the remote K3 but not the control 
side (as soon as they are connected *all* actions on the mini will only 
have effect on the remote K3 ... that's how it is designed). So if you 
change from rP.L (where the RemoteRig box is connected) to FP.L you 
effectively take away the remote audio input to the remote K3. ;-)

The K3/0 mini is all hardwired! It seems the foster front panel 
connector is wired for dynamic mics only. At least my Kenwood fist mike 
which is a dynamic one works without any trouble there. The 3,5 mm 
sockets in the mini's side can be configured for w/bias or w/o bias. 
This is done by a jumper inside the remote head. Of course you could 
also solder a small adapter for the foster that puts the 8 V available 
on a separate pin as bias to the mic pin.

BTW: The foster mic socket in the mini will also automatically be 
disabled as soon as you plug in something to the 3,5 mm mic jack! So 
don't wonder ... ;-)

For PTT you can also use the PTT jack on the mini's backside (avoids 
clutter on the front if you are using a headset anyway).

Hope that helps. Let me know if any other questions ... have been using 
the mini for quite some time now ...

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 29.12.2014 um 23:34 schrieb kb2m at arrl.net:
> While waiting for Elecraft to get back to me on this I thought I would ask
> here also.
>
> Along with the issue of the K3/0 mini not powering the remote K3 on just
> off, I noticed today that I can't get any audio drive out of the FP.L mic
> sel, I only get audio out of the rP.L mic sel. This is no big deal as I'm
> using a headset and can simply plug into the mic jack on the side of the
> K3/0 mini, still using the PTT from the main 8 pin foster connector. This of
> course would be a problem if I were to try using a desk mic. When I select
> FP.L I get no drive audio in the side mic jack, so I guess the hardware is
> ok. Anyone else seeing this behavior?
>   I setup the control 1258 to try and control my K3 tomorrow from my summer
> home, that is 60 NMI away. I guess I will leave everything here at the
> remote site powered on for the test.
>
>
> 73 and a HNY Jeff kb2m
>
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> kb2m at arrl.net
> Sent: Sunday, December 28, 2014 16:31 PM
> To: 'Elecraft Reflector'
> Subject: [Elecraft] Remoterig k3/0 mini won't power up remote K3
>
>   I'm in the middle of setting up my K3 K3/0 mini Remoterig 1258 pair setup.
> It's going well, I have most everything done at the remote site. I have
> DXLab running on a laptop controlling the remote K3 via the control K3/0
> mini. All I have left to do at the remote site is the cable mod for the
> KPA500.
>   I have one issue. The control station powers down the K3 and KAT500, but
> not the KPA500. This should work when I do the KPA500 cable mod. The issue
> is that when I turn on the K3/0 mini it doesn't turn on the remote K3. I see
> a config item for a Yaesu radio in the Microbit s/w, but not sure it's for
> an Elecraft setup. Anyone have an answer to this problem? Any suggestions ?
> Before I try remoting from another site I would like to be able to power the
> remote equipment on and off...
>
> 73 Jeff kb2m
>    
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>