[Elecraft] Heil Proset KX3 Element?

[Mark Forsyth]

The next segment after the "10" on the CMP scale occasionally flashes. 

Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233

> -----Original Message-----
> From: Kd8nnu [mailto:goldtr8 at charter.net]
> Sent: Sunday, December 28, 2014 12:35 AM
> To: vk3zmf at bigpond.com; 'Carl Jón Denbow'; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Heil Proset KX3 Element?
> 
> Compresdion at 25 seems high compared to my setup.  I use 17 on mine
> which gives 10 db according to the display.   How many db is 25 with your
> setup i am curious as i have the same mic.
> 
> 
> 
> Sent on the new Sprint Network from my Samsung Galaxy S®4.
> 
> 
> -------- Original message --------
> From: Mark Forsyth
> Date:12/27/2014 1:26 AM (GMT-06:00)
> To: 'Carl Jón Denbow' ,elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Heil Proset KX3 Element?
> 
> G'day Carl,
> 
> If you get aggressive with TX EQ you can make the Heil iC element sound
> pretty good. If you can get someone who knows your voice to listen while
> you make adjustments you should be able to come up with settings that suit
> your voice.
> 
> I started out with the settings outlined on the Heil All things Elecraft page -
> it's at http://www.heilsound.com/amateur/dsp-settings/125-all-things-
> elecraft and with the help of another operator finally came up with the
> following :-
> 
> -16, -16, -06, +00, +06, +12, +12 and +09 for TXEQ.
> Compression is at 25 and mic gain is high enough to have the fifth, and
> occasionally the sixth, ALC bar flickering.
> 
> With those settings I often get unsolicited reports of very good audio.
> 
> Cheers,
> Mark F...
> VK3ZMF / VK3KW
> KX3 with the lot # 1675
> KXPA100 # 530
> PX3 # 233
> 
> > -----Original Message-----
> > From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> > Carl Jón Denbow
> > Sent: Saturday, December 27, 2014 11:03 AM
> > To: elecraft at mailman.qth.net
> > Subject: [Elecraft] Heil Proset KX3 Element?
> >
> > I have a Heil Proset with the ic element.  I get fairly lack luster
> > audio
> reports.
> > What would be the best replacement element to use?  I assume that it's
> > a fairly simple operation to replace the ic element with another one.
> > It
> looks
> > like there are just two phillips screws holding on the cover of the
> element
> > box at the end of the boom.
> >
> > Any and all ideas, experiences, etc., appreciated.
> >
> > 73,
> > Carl
> >
> > =================================================
> > Carl Jón Denbow, N8VZ
> > 17 Coventry Lane Athens, Ohio 45701-3718
> >
> > carl at n8vz.com
> > www.n8vz.com
> > EM89wh
> > IRLP 4533 Echolink 116070
> > PSK and JT65 Forever!
> > =================================================
> >
> __________________________________________________________
> > ____
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> Message
> > delivered to vk3zmf at bigpond.com
> 
> __________________________________________________________
> ____
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to goldtr8 at charter.net