[Elecraft] [K3] Sound card suggestions - TASCAM 366
Robert Nobis
n7rjn at nobis.net
Fri Dec 26 21:20:15 EST 2014
A few weeks ago, my wife asked me what I wanted for Christmas and I said a TASCAM 122 USB Interface. Instead I received a TASCAM 366. She checked on line and the 122 was listed as discontinued and replaced by the 366, so she ordered the 366.
So now I have a TASCAM 366, which has significantly more capability that I really need. Anyway I will try to use it with my K3 for JT65 and JT9 operation. I am wondering, however, if anyone on this reflector has any experience with the 366 and could provide some hints for proper setup and operation.
Thanks and Merry Christmas.
73,
Bob - N7RJN
n7rjn at nobis.net
> On Dec 26, 2014, at 18:42, Arlen Fletcher <arlenfletcher at mac.com> wrote:
>
> Santa dropped off a TASCAM US-125M at my house yesterday. All is good, except I'm perplexed with the settings on the K3. I'm using line out on the K3 (stereo) into the line inputs on the 125M. I have the line level cranked all the way up to 100, but the input level on DM780 (Ham Radio Deluxe) shows an input level of about 29. I'd expect more signal than this. If I run the signal from the K3 line output into the mic input on the 125M I can easily overload the 125M.
>
> Shouldn't there be a better signal on the K3 line out?
>
> Thanks in advance for any thoughts on this.
>
> 73, Arlen - AA7F
>
>
>
>> On Nov 22, 2014, at 09:45, James Bennett <w6jhb at me.com> wrote:
>>
>> Ian - FWIW - I replaced my SLUSB several months ago with a TASCAM US-125M external USB sound card. Got it on Amazon.com <http://amazon.com/>. Selling the SLUSB on eBay paid for the TASCAM unit. I have it connected to my 27” iMac and use it for PSK31, JT65, JT9, and an occasional RTTY QSO. No jumpers to fiddle with, no special cables - simple cables with RCA connectors. Couldn’t be happier with it. The TASCAM units are also recommended on the K9AY web pages.
>>
>> 73, Jim / W6JHB
>> Folsom, CA
>>
>>
>>> On Saturday, Nov 22, 2014, at Saturday, 8:44 AM, Ian - Ham <km4ik.ian at gmail.com> wrote:
>>>
>>> I've been trying to get back into the digital modes, and am discovering that
>>> the sound card built into my PC probably isn't adequate to the task (lack of
>>> adjustable settings in terms of equalization/balance). The old EMU0202 that
>>> everyone recommends isn't available any longer, and a search of eBay this
>>> morning turns up none being offered there at the moment. I have a SignaLink
>>> USB, which is currently configured for use with my FT-817 when I'm operating
>>> portable, and I don't want to have to reconfigure it every time I want to
>>> use a different rig.
>>>
>>>
>>>
>>> So, my question is this - What else are people using as an external USB
>>> sound card with their PCs and the K3? I have an HP desktop with Windows 7.
>>> The computer doesn't have room inside for another internal sound card due to
>>> other expansion boards I put into it. :)
>>>
>>>
>>>
>>> Thanks and 73,
>>>
>>>
>>>
>>> --Ian
>>>
>>> Ian Kahn, KM4IK
>>> Roswell, GA EM74ua
>>> km4ik.ian at gmail.com <mailto:km4ik.ian at gmail.com>
>>> 10-10 #74624, North Georgia Chapter #2038
>>> K3# 281, P3 #688, KPA500 #1468
>>>
>>>
>>>
>>>
>>>
>>> ---
>>> This email is free from viruses and malware because avast! Antivirus protection is active.
>>> http://www.avast.com
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to w6jhb at me.com
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to arlenfletcher at mac.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7rjn at nobis.net
More information about the Elecraft
mailing list