[Elecraft] Bricked my K3 as well

[Hisashi T Fujinaka]

That fixed things. The Help had more info and a different reset
procedure than in Fred's book: holding down power for 10 seconds. That
and a different laptop seem to have let me reload the beta firmware.

On Fri, 26 Dec 2014, Dick Dievendorff wrote:

> K3 Utility Help, Trouble shooting MCU Load Failure covers this.
>
> Dick
>
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> Hisashi T Fujinaka
> Sent: Friday, December 26, 2014 1:35 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Bricked my K3 as well
>
> It's dead. I have it in MCU load mode with the TX light blinking and "MCU
> LD" on the display. I can't get communications test to work. Using the
> latest utility, trying Mac w/latest driver, Windows 7 with the latest
> driver, about to try Linux.
>
> Tried several different cables.
>
> Anything else I forgot?
>
> --
> Hisashi T Fujinaka - htodd at twofifty.com
> BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to dick at elecraft.com
>

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee