[Elecraft] K3 phone plug

[John McBee]

On 12/24/2014 4:26 AM, Mike K2MK wrote:
> Hi John,
>
> Are you sure your external speaker is plugged in to the speaker jack and not
> the rear headphone jack?
>
> 73,
> Mike K2MK
>
>
> John McBee-2 wrote
>> Problem still exist, however I have discovered that if I turn on spkr+ph
>> to on, I have audio fine without headphones plugged in, but if I change
>> it to spkr+ph to NO then the audio in speaker shuts off with no
>> headphones plugged in.  I have sprayed my phone connector plug with
>> Eledtronic cleaner and put in phone jack and turned it and still no
>> audio out speaker with phone plug out.  When I turned on my K3 this
>> evening before doing the test, I could not get any audio out speaker at
>> all.  Before it was hit and miss.  So question again, cud it be phone
>> plug on the K3 or firmware issue? Firmware agn is MCU 4.86.
>>
>> Thanks
>> John
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-phone-plub-tp7596284p7596323.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jrmcbee at cox.net
I don't have an external speaker plugged into the K3. I'm using the 
front headphone jack for the headphones only.

John