[Elecraft] K3 DC Output

[Bill Adams]

The mod kit has a label for the higher current capacity that is used to cover the original one on the K3.  I'm guessing new K3s are labeled correctly with the higher available current. 

Bill AF4B

-----Original Message-----
From: "Don Wilhelm" <w3fpr at embarqmail.com>
Sent: ‎12/‎22/‎2014 2:17 PM
To: "Dauer, Edward" <edauer at law.du.edu>; "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3 DC Output

Ted,

Yes, K3s manufactured after the mod came out do have the 1 amp output 
rating starting with SN 6588.
The Owner's Manual itself has not been updated, but Errata Rev D10-5 
dated June 9, 2014 states the places where the manual should be manually 
updated.

73,
Don W3FPR

On 12/22/2014 11:55 AM, Dauer, Edward wrote:
> According to the Manual the K3¹s DC output socket is limited to 0.5 amps,
> which I understand means it can power a P3 alone but not both a P3 and a
> PR6-10, nor a P3 with the VGA accessory.  I looked through the on-line
> manual for the mod kit this morning - it looks like major surgery.  Did
> Elecraft incorporate the mod in K3¹s shipped after the mod came out in
> 2012?  My K3 is S/N 7562.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to af4b at att.net