[Elecraft] KPA500-KAT500-K3 problem

[Sam Morgan]

That was my thought Jack. I just re re checked, no bent pins, and both 
ends firmly reseated. no joy :-(

On 12/22/2014 8:43 AM, Jack Brindle wrote:
> Sam;
>
> It sounds like the Auxbus is no longer connected from the KPA to the
> KAT/ K3. Make sure the 15 pin connector is solidly connected on both
> sides at both the KPA and the KAT. Also, make sure no pins in that
> cable are bent.
>
> - JackB, W6FB
>



-- 
GB & 73
K5OAI
Sam Morgan