[Elecraft] K3/KAT500 Synchronization

Cady, Fred fcady at ece.montana.edu
Thu Dec 18 14:44:06 EST 2014


There is a 'K-Line Introduction and Set Up Guide" on www.ke7x.com that should help understand all this.
Cheers and 73,
Fred
KE7X


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Dievendorff
Sent: Thursday, December 18, 2014 11:37 AM
To: 'James Bennett'; 'Elecraft Reflector Reflector'
Subject: Re: [Elecraft] K3/KAT500 Synchronization

This was introduced in K3 firmware revision 4.83.

Dick


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of James Bennett
Sent: Thursday, December 18, 2014 10:17 AM
To: Elecraft Reflector Reflector
Subject: [Elecraft] K3/KAT500 Synchronization

Forgive me if this has been discussed (and answered) before but I do not find it in the archives. A while back there was a firmware update that would allow the KAT500 to “automatically” select the memorized L/C values as the K3 was tuned across a band. I have the current firmware in both units, but do not see (hear) the KAT500 doing anything as I tune across the band. For example, I just set the K3 at 14.006 and tapped the key paddle. The tuner clicked once and lit up the LED at the 1.2 mark. I then turned the K3’s VFO knob up to 14.080 - not a sound to be heard while tuning. When I got to that frequency, I tapped the key again and heard a short relay click noise and again got the 1.2 LED.

So, my K3 and KAT500 are not doing what I thought the changed firmware was supposed to do. Is this something I need to set in a menu parameter in one or both units? Or, is this still a change residing in a beta version of the firmware?

Thanks, Jim / W6JHB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to dick at elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to fcady at ece.montana.edu


More information about the Elecraft mailing list